S.T.A.L.K.E.R. 2: Heart of Chornobyl (PS5 Remote Play)
Z and C lean left and right on L1 and R1, the two buttons the game itself puts lean on, and Tab is a second route onto L1 for the quick access radial where the medkits and bandages live. Q selects the detector and E the flashlight on their own dpad slots, I opens the inventory, U opens the weapon upgrade menu, 1 is the knife on the right stick click, and 2 or 3 swap the weapon. Shift carries both sprint and, while you are aiming, held breath, exactly as it does on the PC build, X slows the stick to a quiet walk, and M or P open the PDA on the touchpad.
From the author
Setting this up for PS5 Remote Play
This preset drives a virtual DualShock 4 from your keyboard and mouse, so S.T.A.L.K.E.R. 2 reads an ordinary controller. Buttons, sticks and triggers are proven end to end through chiaki-ng on a real PS5. The touchpad binds are here because the output IS a DualShock 4, but a touchpad press arriving over Remote Play has not been measured yet, so treat those binds as untested.
Install a Remote Play client on this PC and pair it with your PS5. These presets are built and tested against chiaki-ng.
In the Remote Play client, turn OFF its own keyboard and controller mapping, and unplug or hide any controller you are not using. The client merges every input it can see with this one, so anything left connected fights your binds.
In OmniControl, set the Emulation output to DualShock 4 and start it.
Import this pack, then turn on Drive a Controller.
Start the Remote Play client and connect. It picks up the virtual DualShock 4 the same way it would a real pad plugged into this PC.
Launch S.T.A.L.K.E.R. 2 on the console and play.
Aim is tuned to 36 cm per 360. If that feels fast or slow for your mouse, change it on the Drive a Controller page - everything else in the preset stays as it is.
If the character drifts or walks by itself, a real controller is still connected and the client is merging it with this one. OmniControl's Hide my controller fixes that, or unplug it.
Remote Play streams video, so there is always some delay between your hand and the screen. A wired connection to the console does more for that than any setting here.
What this pack changes
- Lightbar - custom colour
- Emulation - virtual controller target
Have the app installed? Use Open in OmniControl below - it jumps straight to the import preview. Otherwise:
- Open OmniControl and go to Profiles (or Game Packs).
- Click Import, then paste the code above into the share-code box.
- Preview what it changes, then create a profile from it.
Importing only ever creates a NEW profile - your existing profiles are never touched.