WWE 2K26 (PS5 Remote Play)
The ring runs on WASD with the light and heavy strikes on the two mouse buttons, so the light into heavy combo chain stays under one hand. E grabs and whips, Space is the reversal and the held block, Shift runs, Ctrl is the modifier that turns light into a Signature and heavy into a Finisher, R picks up weapons and drags, and C climbs and leaves the ring. Taunts and payback sit on 1 to 4, target change is on Mouse4 and the touchpad target display on Mouse5; the right stick's pin, lift and reposition flicks are not something a keyboard can send, so this preset covers the strike, grapple and taunt game.
From the author
Setting this up for PS5 Remote Play
This preset drives a virtual DualShock 4 from your keyboard and mouse, so WWE 2K26 reads an ordinary controller. Buttons, sticks and triggers are proven end to end through chiaki-ng on a real PS5. The touchpad binds are here because the output IS a DualShock 4, but a touchpad press arriving over Remote Play has not been measured yet, so treat those binds as untested.
Install a Remote Play client on this PC and pair it with your PS5. These presets are built and tested against chiaki-ng.
In the Remote Play client, turn OFF its own keyboard and controller mapping, and unplug or hide any controller you are not using. The client merges every input it can see with this one, so anything left connected fights your binds.
In OmniControl, set the Emulation output to DualShock 4 and start it.
Import this pack, then turn on Drive a Controller.
Start the Remote Play client and connect. It picks up the virtual DualShock 4 the same way it would a real pad plugged into this PC.
Launch WWE 2K26 on the console and play.
Mouse aim is deliberately off for this one: it plays better on the sticks, so the mouse is left alone rather than fighting the camera.
If the character drifts or walks by itself, a real controller is still connected and the client is merging it with this one. OmniControl's Hide my controller fixes that, or unplug it.
Remote Play streams video, so there is always some delay between your hand and the screen. A wired connection to the console does more for that than any setting here.
What this pack changes
- Lightbar - custom colour
- Emulation - virtual controller target
Have the app installed? Use Open in OmniControl below - it jumps straight to the import preview. Otherwise:
- Open OmniControl and go to Profiles (or Game Packs).
- Click Import, then paste the code above into the share-code box.
- Preview what it changes, then create a profile from it.
Importing only ever creates a NEW profile - your existing profiles are never touched.